1. Cutting Fluid / Emulsion Wastewater — The Most Mature and Stable in Effect

Treatment objects: Emulsions, cutting fluids, grinding fluids, cleaning fluids

Equipment type: Low-temperature heat pump evaporation + demulsification pretreatment

Actual effects:

Reduction rate: 90% - 95%

1 ton of wastewater → only 50 - 100 kg of concentrated oil sludge remains

Effluent COD: ≤ 200 mg/L

Effluent can be directly reused for: cleaning, floor flushing, cooling water replenishment

Hazardous waste volume is reduced by more than 90%, and disposal costs are significantly reduced

Core advantages:

No need for chemical addition or biochemical treatment

Fully automatic operation, unattended

Solves the most troublesome problem of difficult emulsion treatment for enterprises

2. Electroplating / Surface Treatment Industry — Standard Configuration for Zero Discharge

Treatment objects: Electroplating rinse water, anodizing, phosphating, passivation, pickling wastewater

Equipment type: Spray / falling film low-temperature heat pump evaporation

Actual effects:

Heavy metal removal rate: Over 99%

Copper, nickel, chromium, and zinc are all retained in the concentrate

Effluent conductivity: ≤ 100 μS/cm

Can be directly reused in electroplating rinse tanks

Water recovery rate: 90% - 95%

Realizes true zero discharge in the workshop

Core advantages:

Completely replaces the traditional complex "chemical precipitation + biochemistry + membrane" process

Environmental assessment and acceptance pass at one time

No sludge, no secondary pollution

3. Chemical Industry — Nemesis of High-Salt Wastewater

Treatment objects: High-salt wastewater, reactor cleaning water, intermediate wastewater, circulating water concentrate

Equipment type: Forced circulation low-temperature evaporation / MVR

Actual effects:

TDS can be concentrated from tens of thousands to saturation

Electricity consumption per ton of water: 90 - 120 kWh (heat pump); 20 - 45 kWh (MVR)

Effluent is clear and transparent, can be reused or discharged

Solves the pain points of high-salt biochemistry inactivity and membrane blockage

Core advantages:

Resistant to high salt, pollution, and not easy to block

Continuous evaporation with high concentration ratio

Suitable for centralized treatment in large chemical parks

4. Pharmaceutical Industry — Specialized for Thermosensitive and High-COD Wastewater

Treatment objects: API wastewater, traditional Chinese medicine extraction wastewater, laboratory wastewater, cleaning wastewater

Equipment type: Low-temperature vacuum evaporation (35 - 50℃)

Actual effects:

Evaporation at low temperature of 35 - 50℃, without damaging materials or generating odors

High COD removal rate, with all pollutants retained in the concentrate

Effluent has no odor or color

Meets the environmental protection requirements of GMP workshops

Core advantages:

Fully enclosed, no exhaust gas leakage

Safe, explosion-proof, and low noise

Suitable for pharmaceutical workshops sensitive to odor and temperature

2. One-Sentence Summary of Effects in Four Industries (Ready for Direct Use)

Cutting fluid: 90% + reduction, significant reduction in hazardous waste, effluent reuse

Electroplating: Complete interception of heavy metals, effluent reused for rinsing, zero discharge

Chemical industry: Resistant to high salt, no pipe blockage, solves the problem of inactive biochemistry

Pharmaceutical industry: Low-temperature and mild, odorless and safe, meeting GMP environment