The evaporator relies on a complete system of vacuum low-temperature boiling, heat transfer vaporization, gas-liquid separation, and condensation collection to achieve waste liquid reduction. The core components are as follows:
The main body of the evaporation tank (main reaction kettle) equipment, where the waste liquid boils and evaporates at low temperature in a vacuum negative pressure environment inside the tank; The material is selected based on the corrosion characteristics of the waste liquid, including 304, 316L, 2205 duplex steel and titanium. It is equipped with liquid distribution, anti foaming, and defogging structures, and is the core chamber for evaporation and concentration.
Heat exchangers (heating components) are divided into plate heat exchangers/coil heat exchangers, which provide heat sources for waste liquids. The heat pump model is equipped with a heat pump heat exchanger, and the electric heating type uses an electric heating heat exchange module to maintain the required temperature for evaporation inside the tank. The heat exchange efficiency directly affects the evaporation capacity.
The vacuum unit includes a vacuum pump, a gas water separator, and a buffer tank, which continuously evacuate the evaporation chamber, reduce the boiling point of waste liquid, and achieve low-temperature evaporation. Commonly used water ring vacuum pumps and dry vacuum pumps, the stability of vacuum degree determines the evaporation temperature and processing efficiency.
The gas-liquid separator/demister is installed at the steam outlet of the evaporator to intercept the liquid droplets, suspended solids, and oil stains carried by the steam, prevent pollutants from being brought into the condensation system, and ensure the quality of the distillate. It is a key component for controlling the condensate water to meet the standard.
The secondary steam from the condenser enters the condenser for heat exchange and cooling, transforming from gaseous to liquid distilled water. Divided into water-cooled and air-cooled types, the heat exchange area directly determines the condensation capacity, avoiding vacuum fluctuations caused by non condensing steam.
The distillate collection tank and the concentrated liquid discharge unit distillate tank can store the condensed effluent and can be equipped with online sampling ports; The concentrated discharge component is used to discharge high concentration concentrated residual liquid, and there are various forms of intermittent discharge and automatic slag discharge.
The power heat source core of the heat pump host (heat pump type low-temperature evaporation exclusive core) heat pump model recovers heat from the condensing side for circulating heating, significantly reducing operating energy consumption, and is also a key component of mainstream energy-saving models.
Automatic control system PLC control cabinet, touch screen, temperature/pressure/liquid level/PH sensors, regulating valve, flow meter. Real time linkage control of vacuum degree, temperature, feeding, discharging, alarm interlocking, achieving fully automatic unmanned operation.
Defoamer and pretreatment auxiliary components (optional core parts) are designed for emulsions and high COD foaming waste liquids, with built-in defoaming devices; Partial working conditions are equipped with pre filtration to protect the main evaporation chamber and reduce scaling and blockage.
Additional notes
The durability of equipment mainly depends on three major components: vacuum unit, heat exchanger, and defogger; The maintenance cost and failure rate are mainly concentrated in these components. Priority should be given to material selection and maintenance, sealing components, and heat exchange structure design.