I. 10 Core Parameters You Must Check When Purchasing Low-Temperature Evaporation Equipment

1. Daily evaporation capacity (processing capacity) t/d

Determines whether it can meet your water volume requirements.

Key points to check: Rated evaporation capacity, actual stable evaporation capacity (many manufacturers falsely mark this).

2. Power consumption per ton of water kWh/ton of water

Directly determines the operating cost.

Heat pump type normally: 90 - 150 kWh/ton

MVR type: 20 - 45 kWh/ton

False marking of power consumption = doubled cost in the later stage.

3. Distilled water recovery rate %

Normal: 90% - 95%

A rate lower than 90% indicates poor design, easy foaming, and unreasonable concentrated discharge.

4. Evaporation temperature / vacuum degree

Temperature: 40 - 60℃

Vacuum degree: Absolute pressure 0.08 - 0.095 MPa

Excessively high temperature = high corrosion and high energy consumption; unstable temperature = poor efficiency.

5. Equipment material

Ordinary wastewater: 304 stainless steel

Electroplating / high-salt / acidic: 316L

Strongly corrosive: Titanium / Teflon

Cutting corners on materials = corrosion and water leakage within 1 - 2 years.

6. Heat exchange form (determines whether it is easy to block and its efficiency)

Washing water /